How To Cut Tree Limbs That Are Too High To Reach?

You need to take care of the tree you have in your yard to ensure its health and aesthetics. It involves trimming or cutting tree limbs to maintain the tree’s shape and canopy. Regarding this, you can easily cut down the stems at the tree’s lower part and easy to reach.

how to cut tree limbs that are too high to reach

However, attempting to cut high tree limbs can be difficult. So, you must understand how to cut tree limbs too high to reach. It needs proper techniques and safety measures since cutting down higher tree limbs can be dangerous.

Thankfully, you can use a long and adjustable pole pruner, a pole saw or even a chainsaw with a ladder or shearing to trim the higher branches of a tree. Alternatively, you can climb on the extended ladder or use a harness to reach the limbs and cut them down. For professional help “Click Here

How to Cut Tree Limbs That Are Too High: Top 5 Ways Described

You must cut them effectively and safely when tree limbs grow too long. It is crucial to ensure proper tree growth and protect your property. However, if the tree limbs are too high, such as 20ft to 30ft, you can choose one of the following ways.

Method 1: With a Pole Saw

A pole saw is an excellent tool for cutting high branches. It consists of a chainsaw blade that connects with an extendable pole. The extendable pole allows you to reach branches several feet above ground level.

A pole saw can easily reach 12ft to 15ft with an expandable pole. Also, the pole saw length is around 6″ to 12″. Thus, with the pole saw, you can easily cut a thicker tree limb at a height. You can follow the steps below to cut hard-to-reach tree limbs with the pole saw:

  • Choose a stable surface to stand on safely. If the tree limb is below 20ft, you can cut it from the ground with the pole saw. You may need to stand on a table or ladder for higher ones to reach it safely.
  • First, determine the height of the tree limb you want to cut. Then, extend the pole to the appropriate length for the branch.
  • Position the saw blade close to the branch collar. The collar of the tree limb is the swollen area where the branch meets the trunk. It is helpful to make a clean cut.
  • Cut small sections at a time to avoid overloading the saw. Also, ensure the tree limb falls safely to the ground without damaging your property.

Method 2: Use a Pole Pruner

A pole pruner is, in many ways, similar to a pole saw. The pole pruner features a cutting blade at the end of an extendable pole. You can adjust the height of the pole pruner with the switch on it. The blade is thinner than the pole saw.

So, it is ideal for smaller branches. Also, the thinner but sharper pruning blade offers more precision than a chainsaw. So, if you need to cut leaner tree limbs, use an expandable pole pruner up to 20ft.

  • Extend the pole to the desired length until it reaches the limb
  • Position the blade above the branch you want to trim
  • Make controlled cuts by using a pulling motion on the pole with the rope

Also, you can hold the limb with another pole to prevent its falling

Method 3: Pocket Saw and Rope

Although pole pruner and pole saw allow you to cut tree branches from the ground, they need more control. So, for more manual control, you can use a pocket saw. It is a small, handheld saw. You can use it with a rope.

  • Throw a rope over the target branch and secure it.
  • Attach the pocket saw at the middle of the rope and move it until the saw reaches the tree branch.
  • Moving the saw back and forth while pulling on both ends of the rope. This back-and-forth pocket saw movement will cut through the branch.
  • This method requires more effort but can be effective for smaller branches. So, if you have thicker and larger tree limbs, you will need a pocket saw to be more suitable.

Method 4: Pruning Saw and Ladder

You should use a ladder with a pruning saw for branches that are just out of reach. It can be suitable for tree branches above 20ft to 30ft high above the ground. Since a pole saw and pole pruner can’t reach that height, you can reach it with the ladder to cut it down.

  • Set up the ladder on stable ground. Ensure the ladder is at the correct angle and doesn’t move, or you may fall from it.
  • Climb the ladder with the pruning saw in hand carefully.
  • Carefully make cuts on the branch as you reach it. You should start from the underside to prevent tearing of the tree limbs that can deteriorate its health.


Method 5: Use Ropes and Harness to Climb and Cut the Tree Limb

If you are confident, you can climb the tree with ropes and a harness to access high branches. As you reach the tree limb with the harness, you can cut it down with the chainsaw. However, this method requires proper training and equipment to ensure safety.

Hence, we only suggest reaching higher tree branches with harness and rope if you are agile and physically fit. Or, you may injure yourself.

Safety Tips to Cut Tree Limbs That Are Too High:

  • Always wear a hard hat, safety glasses, gloves, and appropriate footwear when dealing with tree limbs. It will protect youfrom falling debris and potential accidents.
  • Before using any tools, check for nearby power lines. Keep a safe distance to avoid electrocution hazards, and turn off the electric lines if possible.
  • You should ensure that your cutting tools are sharp and in good condition. Dull tools can cause accidents due to the increased effort required.
  • If you use a ladder, place it on firm, level ground. Also, avoid using a ladder on uneven or unstable surfaces.
  • You can keep a friend or family member nearby. So they can assist in emergencies or when you need anything.

Final Thoughts

You can cut tree limbs too high to reach with a pole saw, adjustable pole pruner and ladder with a chainsaw. You should cut a tree limb during the dormant period. Minimizing stress and reducing the risk of disease or pest infestations is vital.

Additionally, it’s best to trim dead, diseased, or damaged limbs as soon as you notice them, following our suggestions. Last but not least, always ensure proper safety features when dealing with higher, thicker and larger tree limbs.